Documentation
Terrace configurator
E-catalog
Stores
Contact
Side Finishing Plate for Essential Paving Riser Pedestal
Essentiel paving pedestal adjustable from 80 to 140 mm – Packed by 11 pieces
Reference:
IH080140DF50000
Compatible
Terraces
Paved terrace
Riser pedestal terraces
Paving riser pedestals
Our products in detail
Description
4 snappable 3 mm spacers for a smooth surface.
Optimised flange shape for easier fitment against a wall or internal corner.
Millimetre-accurate manual height adjustment using the screw adjuster: no other tools are required.
Reinforced for greater compressive strength.
Self-locking grooves on the underside of the pedestal in contact with the ground for support.
This pedestal is adjustable for heights of between 80 and 140 mm, and designed for tiled, ceramic or slab terraces / patios intended for pedestrian use. Located beneath tile corners at each intersection, it allows air to circulate freely, prevents rising damp and leaves space for cable and pipe runs. By removing the need for arduous earthmoving and joints, it makes the whole process of terrace and patio construction easier. The manual screw adjuster enables precise height adjustment. Hot tubs can also be installed on pedestals using the PROFILDECK solution. For installation details, download the instructions from the “documentation” tab.
compliant with DTU french standards
FDES
Warranty 10 years.
Information sorting
Iso14001
Iso9001
label MORE.
Made in France.
Recycled material.
Keypoints
Resistente, indeformable e inamovible.
Compatible with EASIO® riser pedestals
Compatible with Cleman® riser pedestals
Can be use as a riser pedestal of 10mm.
Screw fixing holes provided: no need to drill.
Ultra-strong.
Optimised stability: the height extender is screwed into place between the flange and the screw adjuster.
1 product with 2 applications.
A single structural solution for 2 applications.
A single product for fixing terrace end and side cladding.
Stackable: 2 extenders can be used to raise the height by 40 mm.
Once in place, the decking edge riser pedestal remains adjustable.
Can be stacked up to 4 high to provide up to 10% slope correction.
The same component is used at either end of the joist.
Height extenders can be stacked up to 4 high.
Can be used straight or to create curves.
Prevents puddling and rutting.
Can be used with small format tiles: 20 cm.
Patented system.
FCBA technology institute certification.
Integrated assembly system to lock modules firmly together.
Locks the edge finishing profile in place.
Glue trap systems.
1000-hour salt spray corrosion test.
Self-levelling head.
The diamond-shaped head enables double joisting on a single row of riser pedestals and the use of a brace before final fixing.
Pivoting head.
Slotted holes for adjustment.
Option to use a single or double screw fixing for butt joints.
Reduces noise and resonances.
The only packers on the market that can be snapped into 2 or 4 sections.
Option to mix materials (timber/paving).
Reduces structural vibration, dampens transmitted impact noise and reduces any resonances.
Easy installation: no additional tools or adhesive required.
Practical solution for replacing individual boards.
Adjusts to fit a range of paving slab sizes from 300 to 700 mm.
Pre-cut and easily cut to shape.
Millimetre-accurate manual height adjustment using the screw adjuster: no other tools are required.
Pre-drilled for easier screw fixing.
Temperature range of -30°C to +60°C.
Height can be preset in advance using the driver bit.
UV and frost resistant.
Ready to install for immediate use.
Strong.
Ready to use.
Pull-out resistant.
Quick to install.
Excellent shear resistance.
Quick and easy to lay.
Robust.
Quick and easy to use.
Suitable for on decking joist support riser pedestals and paving riser pedestals.
Installed directly under the riser pedestal with no glueing or screwing required.
Quick and easy to install.
Adapts to irregularities in the project location.
Can be laid on gradients of up to 10% for traffic routes and 15% for pedestrian areas.
Quick and easy to fit.
No other tools required.
Quick and easy to install using its integral anchoring and jointing system.
Quick and easy to apply.
Applied to the timber decking face of PROFILDECK® joists.
Located on the paved side finishing plate, it damps any resonances and improves paving grip.
Recommended for terraces with high footfall (e.g. those of public buildings).
Provides a visual reference for correct alignment of the paved surface.
Option to include zone markers to divide parking spaces.
Reduces impact noise and resonances by half, compared with a riser pedestal alone.
The only clip-on paved terrace edge profile available in the market.
Easy to handle: a lightweight product.
Height adjustment from 14 to 20 mm.
Non-slip material.
Can correct up to 1 mm of misalignment.
Movable: can be positioned separately from the head of the riser pedestal.
Can be used to create a terrace on uneven or irregular ground.
Geotextile membrane permanently attached to each module.
Perfect for large format (120 x 120 cm) and narrow format (20 x 120 cm, 30 x 120 cm, etc) paving slabs.
Facilitates the timber cladding of MODULESCA® steps.
Acoustic damper included.
Perforations allow water to drain.
Creates a neat joint.
Optimised side cladding: 2 supports integrated into the base flange.
Enables side-by-side assembly of Modulesca® modules and steps, and extension of existing steps to the required width.
Customisable using timber, ceramic tiles or paving slabs.
Rot-proof.
Increases CLEMAN® riser pedestal height by 60 mm.
Can be used with Profildeck® aluminium profiles.
Dimensionally stable, immovable and strong.
Increases riser pedestal height.
Can be used for vehicles with axle loadings of up to 20 tonnes and for fire service access.
Rapid surface water infiltration.
Increases riser pedestal height by 60mm.
Can be used as a 5 mm template for correct positioning.
Invisible to avoid compromising the visual appeal of the installation.
Can be used to compensate for uneven surfaces and differences in height of 1-2 mm (concrete slabs, tiling, thin screeds, etc.).
One-piece riser pedestal.
The bit has a standard 10 mm hexagonal profile for use with a 10 mm wrench, 10 mm socket, etc.
Used to mark out different types of parking space.
Ergonomic plastic handle for good grip.
The bit fits directly into the screwdriver chuck.
Enables: assembly of two Modulesca® steps side-by-side, one Modulesca® step to a 20 cm module or one 20 cm module to another.
Snappable tab: enables fixing of all paving thicknesses and facilitates the installation of a vertical joist.
Secures the Jouplast® finishing profile in place.
Lightweight.
Makes it easier to move, carry and lift paving slabs.
Keeps aggregate in place.
For pre-setting CLEMAN® riser pedestal heights prior to installation.
Invisible finishing system that holds the edge profile in place.
A single product for height adjustment from 11 to 40 mm.
They can also be combined for use as intersection spacers.
Optimal and natural drainage of rainwater.
Forked shape with soft inner teeth.|Stackable thanks to moulded integral lugs.|Perfect centring.|Quick and easy to use.
Compatible with the 60 mm JOUPLAST® height extender (these extenders are stackable to a maximum of 4).
Tool-snappable packers.
Its special shape is ideal for making 45° mitre cuts.
Compatible with ridged wedges.
Snappable packers.
Saves time compared with a cut tile edge finish.
Compatible with the side finishinf plates from CLEMAN® and "Essentiel" ranges of paving riser pedestals.
Self-tapping screws for use with aluminium joists.
Compatible with ESSENTIEL and CLEMAN riser pedestals.
Notched for easier installation.
Compatible with standard and self-levelling riser pedestals from the ESSENTIEL range.
Prevents moisture from rising between PROFILDECK® joists and decking boards.
Compatible with clip-on paved terrace edge profiles.
Prevents slabs from tipping over at the edge of the terrace or against a wall by eliminating any overhang.
Compatible with all JOUPLAST® Essentiel riser pedestal heads.
Prevents any movement of paving over time.
Compatible with flat packers.
Easy to cut.
Compensates for, or can be used to create, gradients of up to 5% on all types of ground.
Easy fitting and removal for maintenance or inspection beneath the terrace.
Complies with French technical standard DTU 43.1.
Easy to install: Only 2 tools required.
Complies with French building regulation DTU 51.4.
Promotes root system growth.
Stackable thanks to moulded integral lugs.
10 mm side offset.
Creates a perfect finish.
Driveable.
Dampens transmitted impact noise.
Invisible fixing of the edge profile.
Perfect centring.
Virtually invisible to avoid compromising the visual appeal of the installation.
Square flange for easy fitting at corners.
CLEMAN® offers 3 options: pre-setting using the driver bit, using the screw adjuster to set the riser pedestal height and using the adjustment wrench to adjust the riser pedestal height.
Double joisting with a 50 mm gap.
Optimised flange shape for easier fitment against a wall or internal corner.
Makes the structure water resistant.
Damps vibrations.
No excavation or site preparation required.
Extends the decking life.
Extends the life of the finished decking.
Joist protection strip to be applied to the top face of the joist in accordance with French building regulation DTU 51.4.
Strong, dimensionally stable and immovable.
Good grip.
100% invisible.
User friendly.
100% recyclable.
Thick paving slabs are locked firmly in place.
2 joist fixing tabs for easier installation by enabling the riser pedestal to be located either side of the joist.
Snappable tabs and baseplate.
2 fixing tabs enable joists between 40 and 80 mm wide to be laid and centred.
Snappable tabs for offset installation.
2 edge trim supports integrated into the base flange.
Saw-tooth ridging for precise spacing.
Sticks to damp surfaces.
Improves stability.
Non-slip.
Ensures correct profile alignment.
Manual and millimeter height adjustment thanks to the nut
Simple and quick implementation without the need for heavy work and earthworks
Breakable spacers, ideal for offset installation
Allows the passage of cables and pipes
Promotes good ventilation, water drainage
Avoids the creation of joints
A complete range of associated products
Unique solutions for side finishing
High resistance to crushing, UV and frost
Complies with DTU 43.1
10 year warranty
Documentation
Technical data sheet
PDF - 636 KB
Essentiel paving pedestal adjustable from 80 to 140 mm - Packed by 11 pieces
Directions for use
PDF - 4 MB
Pavement terrace
Products compatibility
PDF - 871 KB
Plots Essentiel dalle
Products compatibility
PDF - 2 MB
PROFILDECK® Range
Quantity
PDF - 383 KB
Pavement and wood risers
Technical characteristics
Height in mm:
Adjustable from 80 to 140 mm
Basis diameter in mm:
198
Support surface diameter in mm:
120
Spacer thickness in mm:
3
Material:
Recycled polypropylene
Color:
Black, blue nut
Weight KG:
0,339kg
Conditionnement:
Filmed by 11 pieces
Installation and Application
The standard 80/140 mm Essentiel riser pedestal can be used with both the 10, 25 and 60 mm height extenders.
All riser pedestals for paving must be installed on stabilised ground or a precast concrete slab.
The terrace can be finished neatly using the paved side finishing plate and paved terrace side cladding support. See installation instructions.
At least one riser pedestal should be positioned at each corner of the paving slab.
Please refer to the paving/ceramic tile manufacturer’s recommendations to decide whether or not additional riser pedestals may be required.
The paving used must be self-supporting and compliant with French classification T7, T11 or F+.
a question?
Our landscaping experts have the answers
1. Which type of paving should I choose for my terrace ?
Stone, concrete and ceramic tile paving are all options for riser pedestal terraces. Ultimately, the choice will depend on the intended use, laying pattern and, of course, the desired visual appearance of your paved terrace.
2. Can I lay terrace paving directly on the ground?
The surface on which the terrace will be built must be prepared before work can begin. Unprepared ground (e.g. unprepared soil) may change over time and can be subject to movement. Depending on the weight it will subjected to and the local climate (dry periods, heavy rainfall, etc.). For these reasons, it is important to stabilise the ground beneath the terrace to ensure long-term stability of your project.
