This riser pedestal is adjustable for heights of between 130 and 230 mm, and designed for tiled, ceramic or slab terraces intended for pedestrian use.
Self-levelling riser pedestals can be used on uneven or irregular ground to compensate for - or create - a gradient of up to 5%, regardless ground characteristics.
The CLEMAN® range allows you to prepare the site by pre-setting the riser pedestals using the driver bit, use the screw adjuster to set the riser pedestal height, and carry out the final millimetres of adjustment using the special adjustment wrench.
- Type of height adjustment
- Single adjustment and top adjustment
- Height (mm)
- Width (mm)
- Black with grey adjuster
- Recycled polypropylene
- Spacer thickness (mm)
- Riser pedestal head diameter (mm)
- Weight (kg)
- No. of items per Box / Bag (number of items / box or bag)
- No. of Boxes/Bags per Pallet (number of boxes or bags per pallet)
- No. per pallet (number per pallet)
- Multiple orders
- Multiple orders to
- pallet size
- Type of ground
- On prepared level ground or gradients between 1.5% and 5%
- Type of task
- Adjusting the height of a paved terrace
Click on the title of the document below to download it :
Instruction for use CLEMAN® ADJUSTABLE PAVING RISER PEDESTAL
SELF LEVELLING CLEMAN® PAVING PEDESTAL RISER technical data sheet
Optimized lateral finishing : integration of 2 lateral riser support systems.
A square flange makes it easy to lay paving at an angle.
Acoustic rubber damper included.
4 mm divisible spacers (quantity 4) to make the installation easier.
Optimised stability: all the riser elements are mounted together.
A full dedicated related products range : extensions, side finishing plate, adjustment key and driver bit.
Conforms to French regulation DTU 43.1.
Strong resistance to crushing (higher than 1T)
Self-levelling riser pedestals should be used only on uneven ground or existing concrete support.
Lateral finishing can be done with the CLEMAN® side finishing plate. Please read our instructions. CLEMAN® riser pedestal can be used with all slab dimensions.
Please use at least 1 riser pedestal/corner.
Always follow paving manufacturer recommendations to ensure the suitability of paving products for use with riser pedestals and the number of risers per m2 to use.
The paving used must be self-supporting class T7, T11 or F +.
Terraces, decking and patios for outdoor pedestrian use only.