This riser pedestal is adjustable for heights of between 80 and 130 mm, and designed for tiled, ceramic or slab terraces intended for pedestrian use.
The CLEMAN® range allows you to prepare the site by pre-setting the riser pedestals using the driver bit, use the screw adjuster to set the riser pedestal height, and carry out the final millimetres of adjustment using the special adjustment wrench.
- Type of height adjustment
- Single adjustment and top adjustment
- Height (mm)
- Width (mm)
- Black with blue adjuster
- Recycled polypropylene
- Spacer thickness (mm)
- Riser pedestal head diameter (mm)
- Weight (kg)
- No. of items per Box / Bag (number of items / box or bag)
- No. of Boxes/Bags per Pallet (number of boxes or bags per pallet)
- No. per pallet (number per pallet)
- Multiple orders
- Multiple orders to
- pallet size
- Type of ground
- On concrete slab or level ground
- Type of task
- Adjusting the height of a paved terrace
A square flange makes it easy to lay paving at an angle.
Acoustic rubber damper included.
4 mm divisible spacers (quantity 4) to make the installation easier.
Optimised stability: all the riser elements are mounted together.
A full dedicated related products range : extensions, side finishing plate, adjustment key and driver bit.
Conforms to French regulation DTU 43.1.
Strong resistance to crushing (higher than 1T)
Lateral finishing can be done with the CLEMAN® side finishing plate, please read our instructions.
CLEMAN®paving risers can be used with all slabs dimensions.
Please use at minimum 1 riser under each slab corner.
Always follow paving manufacturer recommendations to ensure the suitability of paving products for use with riser pedestals and the number of risers per m2 to use.
The paving used must be self-supporting class T7, T11 or F +.