

Side Finishing Plate for Essential Paving Riser Pedestal
4 snappable 3 mm spacers for a smooth surface.
Optimised flange shape for easier fitment against a wall or internal corner.
Millimetre-accurate manual height adjustment using the screw adjuster: no other tools are required.
Reinforced for greater compressive strength.
This riser pedestal is adjustable for heights of between 8 and 20 mm, and designed for tiled, ceramic or slab terraces intended for pedestrian use. The smallest adjustable riser available in the market today, it is adjustable between 8 and 15 mm, and comes with a 5 mm extension. By removing the need for arduous earthmoving and joints, it makes the whole process of terrace and patio construction easier. Located beneath tile corners at each intersection, it allows air to circulate freely, prevents rising damp and leaves space for cable and pipe runs. Notch-by-notch manual adjustment. Ideal for terrace renovation projects.
The 8/20 mm riser pedestals can be used on concrete slabs, thin screeds, existing paved terraces and unprepared ground. Preparatory works will be necessary on uneven ground. Riser pedestal height is adjusted with millimetre accuracy using the manual adjuster, with no other tools required.
The 8/20 mm riser pedestal cannot be used with the 10 and 60 mm extenders. Given its low height, the following Jouplast® accessories cannot be used to finish terrace edges: the paved side finishing plate and paved terrace side cladding support. See installation instructions.
When the riser pedestal is set to a height of 20 mm and is supporting a paving slab, the 20 mm adjuster can no longer be moved. It is the weight of the paving slab on the riser that stabilises the assembly.
At least one riser pedestal should be positioned at each corner of the paving slab.
Please refer to the paving/ceramic tile manufacturer’s recommendations to decide whether or not additional riser pedestals may be required.
The paving used must be self-supporting and compliant with French classification T7, T11 or F+.
Stone, concrete and ceramic tile paving are all options for riser pedestal terraces. Ultimately, the choice will depend on the intended use, laying pattern and, of course, the desired visual appearance of your paved terrace.
The surface on which the terrace will be built must be prepared before work can begin. Unprepared ground (e.g. unprepared soil) may change over time and can be subject to movement. Depending on the weight it will subjected to and the local climate (dry periods, heavy rainfall, etc.). For these reasons, it is important to stabilise the ground beneath the terrace to ensure long-term stability of your project.
The surface on which the terrace will be built must be prepared before work can begin. Unprepared ground (e.g. unprepared soil or lawn) may change over time and can be subject to movement. Depending on the weight it will subjected to and the local climate (dry periods, heavy rainfall, etc.). For these reasons, it is important to stabilise the ground beneath the terrace to ensure its long-term stability.
of existence at your service
to bad weather
and environmentally friendly
thanks to our innovative systems
Jouplast® guides you in your outdoor development project (terrace, staircase, driveway) by establishing a complete shopping list in 5 minutes.
Also benefit from expert advice to install your project with complete peace of mind.
You will find here all our directions for use.
Find the point of sale closest to you using our dealer map. We remind you that no products are sold directly. Please contact one of our distributors if you wish to receive a quote or make a purchase.
Our products are installed by numerous landscapers or public works companies. We encourage you to contact one of these professionals for the installation of Jouplast® products.
If you need assistance or information, you can reach out to your distributor.
Thank you!
To find the price of your Jouplast® product, we invite you to contact your nearest distributor.
We do not sell directly to individuals or professionals.
To find a price, we recommend contacting your usual distributor.
If your product is defective, we invite you to contact your distributor.
If the response from your distributor is not satisfactory, please feel free to write to us using the contact form.
In the case of receiving slightly deformed or warped pads, we assure you that they remain suitable for installation. Once the covering is installed, the pad will return to its original shape.