Discover the new range of paving riser pedestals
Reed more about CLEMAN®
Our new range of self-levelling product helps the builders to deal with slopes until 5% !
Know more about self-levelling riser pedestal
Discover the new solution of decking or paving structure
Let's talk about the JOUPLAST cooged wedge : with this single wedge, adjust easily your installation from 11 to 40 mm !
Know more about construction wedges
Overcomes slopes up to 5% ! Can also create a 5% slope
Reed more about self-levelling risers
CLEMAN® is an ingenious paving riser pedestal that can be used in different possible ways. It helps the layer to deal with his work in a smooth and easy way.
It is used for paving that is made of ceramics, tiles or concret slabs, for pedestrian use only.
The CLEMAN® riser pedestal is also conforms to DTU 43.1 French legislation. It is crushing and weather resistant.
OPTIMIZED STABILITY / PERFOMED THREAD
All elements are interdependants. No spare parts. Performed thread helps for a better stability.
PRECISE ADJUSTMENT, EVEN LOADED
You can adjust the riser in two ways : handly by turning the screw, or with the special adjustment wrench once tiles are laid on.
OPTIMIZED LATERAL RISER SUPPORT
2 lateral riser supports are integrated directly on the riser basis They are designed with a new system that creates an invisible lateral covering.
BREAKABLE SPACERS THE RISER HEAD
You can choose either to use the 4mm spacers, or remove them
EASIER INSTALLATION ON CORNERS
The square-shape basis helps in reducing cantilever situation
* The OCTO damper reduces vibrations
The CLEMAN wrench is used to adjust easily the CLEMAN pedestal height.
It is strong and guarantees a good handling.
Adjusts the height or pre-adjusts the risers.
The extension for riser helps in increasing the CLEMAN pedestal height. Use the screw thread to fix it to the riser. It is stackable.
The five-sides finishing plate is a new accessory to help the installation on corners or edges. Its specfic shapes is useful when you need some 45° cuts.
How many riser pedestal do I need ?
Clic here to know about the quantity of riser/m²
Which slab shall I use with risers? Please make sure that you use 32mm (min) pressed/self-supporting concrete slabs or 20mm thick (min) Ceramic/Porcelain paving (T7,T11 or F+ standard)
INSTRUCTIONS FOR USE
Please note that neither spas, nor the garden houses can be set on risers.