Innovative Decking
and Paving Solutions




The self-levelling paving riser is an adjustable support with a rotating head that automatically deals with level differences in the terrace area (slope, uneven ground etc...). No need for additionnal tools. 


This specific range allows also to create slopes up to 5% if needed.


It can be used for paving with : ceramics, concrete slabs, tiles.

Please be aware that these are products for pedestrian use only.


Which area to cover? 


  • up to 5% slope
  • uneven area
  • on sealing


Please note that neither spas, nor the garden houses can be set on risers.


Same as standard paving riser pedestals, the self-levelling range is are weather and crush resistant. 


Conforms with DTU 43.1 French legislation, Jouplast® risers are approved for sealing.


When used to build terrace, they are placed under each slab corner*. They :


  • allows the air to circulate
  • avoid upwelling
  • allows pipes and cables.



Which slab shall I use with risers? Please make sure that you use 32mm (min) pressed/self-supporting concrete slabs or 20mm thick (min) Ceramic/Porcelain paving (T7,T11 or F+ standard)


All spacers on the top of our riser are breakable. Then, the head of the riser is slick so that you can use riser in the middle of slabs, or you can put more riser under slabs widerlength (please check with slab manufacturer*)


How many risers shall I use ?*


 Slab size 40 x 40cm 50 x 50cm 60 x 60cm
 Riser/m² 6 4 3

* NB : Depending on slab manufacturers'advice, please add one riser in the middle of the slab, or under widerlengths.


Clic here to know about the quantity of riser/m²



  Check here if all PAVING PRODUCTS are matching !



 HA 29/39mm riser

HA 55/75mm riser

HA 65/95mm riser

From 29 to 39mm adjustment From 55 to 75mm adjustment From 65 to 95mm adjustment
vibration damper included vibration damper included vibration damper included
NB : please use 10mm or 60mm to adjust heights



HA 95/155mm riser

HA 155/245mm riser

From 95 to 155mm adjustment From  155 to 245mm adjustment
vibration damper included vibration damper included
NB : please use 10mm or 60mm to adjust heights




Please contact us should you need any contents.