Innovative Decking
and Paving Solutions

INVISIBLE FIXING SYSTEM FOR WOODEN DECKING BOARD

 

 

FIXEGO® is the JOUPLAST® system for the invisible fixing for wooden decking board.

It is an innovatinve product that helps in building a durable decking, with no visible screw. 

 

NB : FIXEGO® is to be used in a decking project, for pedestrian use only, that respects the regulations (ie. French DTU 51.4 regulation)

 

 

INVISIBLE

FixeGo® is 100% invisible.  It also helps in creating a regular spece between ledger boards, with no visible screw.

 

INCREASES DECKING LIFETIME

In order to protect the decking, it is important to leave a space between all its elements : decking joist, ledger boards etc.. so as to allow the air to circulate. This will reduce degratdation.

 

USEFUL WHEN REPLACING A DAMAGED BOARD

FixeGo® is handly divisible. When using half fixation along with pawls, you can replace damaged wooden board without disturbing the full decking. 

 

PERFECT FOR DECKING RENOVATION

FixeGo® can be used for all decking joist types, but can also be laid directly on a concrete suface. It can then be directly used when there is few space for decking joist.

 

SIMPLE AND UNIVERSAL

FixeGo® does not require a lot of additionnal tools to be installed, and is accessible to anyone. It adapts to any decking board type with no specific machining on boards required.

 

Our range

Packaging

Fixego for 19-25 mm thick ledger boards

Sets for 4m² including as follows :

- 64 fixation tabs

- 200 screws for ledger boards

- 4 JOUPLAST® 5mm spacers

- 12 pawls with 24 adapted screws

 

Fixego for > 25mm thick ledger boards

 

Additional pawls and screws Blister including 20 pawls and 40 screws

* for 145mm larged wooden board, with a distance between decking joists.

 

DIRECTIONS FOR USE

 
  • Do not use any composite boards with FIXEGO®
  • In compliance with the French DTU 51.4 regulation, please make sure that wood moisture rate is between 18% to 22% max. If higher, the deterioration will be speeded.
  • If it's possible, better using same wood type for boards and joists.
  • Better not using Fixego® with hard, not stable wood (ie:acacia)

 

TECHNICAL DATA

 

Fixation

Pawls

Screw

Material

Reinforced polypropylen Steel

Dimensions

 203 mm x 20 mm x 10 mm  26.5 mm x 38 mm x 10 mm Fixego® 19/25 mm  6x 25 mm (TX25)
Fixego® sup 25 mm  6 x 30 mm (TX 25)
Pawls  4 x 25 mm (TX20)

Resitance

Pullout resistance conforms to Frenche DTU 51.4 regulation.

 

 

 

 

 

Please contact us should you need any contents.