The self-levelling paving riser is an adjustable support with a rotating head that automatically deals with level differences in the terrace area (slope, uneven ground etc...). No need for additionnal tools.
This specific range allows also to create slopes up to 5% if needed.
It can be used for paving with : ceramics, concrete slabs, tiles.
Please be aware that these are products for pedestrian use only.
Which area to cover?
up to 5% slope
Please note that neither spas, nor the garden houses can be set on risers.
Same as standard paving riser pedestals, the self-levelling range is are weather and crush resistant.
Conforms with DTU 43.1 French legislation, Jouplast® risers are approved for sealing.
When used to build terrace, they are placed under each slab corner*. They :
allows the air to circulate
allows pipes and cables.
Which slab shall I use with risers? Please make sure that you use 32mm (min) pressed/self-supporting concrete slabs or 20mm thick (min) Ceramic/Porcelain paving (T7,T11 or F+ standard)
All spacers on the top of our riser are breakable. Then, the head of the riser is slick so that you can use riser in the middle of slabs, or you can put more riser under slabs widerlength (please check with slab manufacturer*)
How many risers shall I use ?*
40 x 40cm
50 x 50cm
60 x 60cm
* NB : Depending on slab manufacturers'advice, please add one riser in the middle of the slab, or under widerlengths.